♨️✨ Hot Tub Guide: Relax, Unwind & Enjoy! 🫧💦

Hot Tub Instructions

1. Remove the cover

• Release the clips/locks on the sides of the cover.
  

• Carefully lift and fold the cover back.
  

• Please do not sit, stand, or place any weight on the cover.
  

2. Turn on the hot tub

Use the control panel to operate the hot tub:

• Pumps: Turns the water jets on and off.
  

• Light: Turns the hot tub lights on and off.
  

• UP: Increases the water temperature.
  

• DOWN: Decreases the water temperature.
  

3. Adjust the temperature

• The current water temperature is displayed on the control panel.
  

• Press UP to increase the temperature.
  

• Press DOWN to decrease the temperature.
  

• After selecting the temperature, wait a few seconds for the display to return to the current water temperature.
  

4. Turn on the jets

• Press Pumps to activate the water jets.
  

• Press it again to adjust or turn off the jets, depending on the current setting.
  

5. Turn on the lights

• Press Light to turn the lights on.
  

• Press it again to turn them off or change the lighting cycle, depending on the setting.
  

6. When finished

• Turn off the Pumps and Light.
  

• Carefully replace the cover over the hot tub.
  

• Make sure the cover is properly secured with the side clips/locks.
  

⚠️ Important

• Never use the hot tub with the cover on.
  

• Do not sit or place any weight on the cover.
  

• Please make sure the water level is adequate before using the hot tub.
  

• Keep the hot tub covered when it is not in use.